High Volume Low Pressure Spray Gun (15) Low Volume Low Pressure High Adhesion Spray Gun (10)
High Volume Low Pressure Detail Gun (12) Low Volume Low Pressure High Adhesion Detail Gun (2)
High Pressure (13) High Pressure Detail Gun (3)
Pressure Spray Gun (13) Multi-Function Economic Spray Gun (13)
Architecture Spray Gun (Hopper Gun) (8) Auto Spray Gun (4)
 
Auto Spray Gun
Product ID: WA-100
Specifications:
 
  • Feed type: Pressure
  • Working pressure: 43PSI
  • Air consumption: 9.0CFM
  • Pattern lengt: 6-8"
  • Nozzle spec.: 0.8mm, 1.0mm
Features:
 
  • Mass painting for medium and small stuffs.
 
Pressure Spray Gun
Product ID: MS-5
Specifications:
 
  • Suitable for applying thin or heavy material, such as water lacquer, solvents, silcone, lubricant, Mould Release, INK, Stain.
  • Atomization and needle seal are controlled by the same air hoses recommended air pressure at gun inlet is 3-4 kgf/cm2, needle seat will not move if air pressureis less than 2 kgf/cm2
  • Nozzle available: 1.0, 1.3 mm
 
Pressure Spray Gun
Product ID: MS-6
Specifications:
 
  • Suitable for applying thin or heavy material, such as water lacquer, solvents, silcone, lubricant, Mould Release, INK, Stain.
  • Atomization and needle seal are controlled by the same air hoses recommended air pressure at gun inlet is 3-4 kgf/cm2, needle seat will not move if air pressureis less than 2 kgf/cm2
  • Nozzle available: 1.0, 1.3 mm
 
 
© 2007 MING SHENG IND. CO., LTD. All Rights Reserved.